![]() 1910.178(g)(2): Facilities shall be provided for flushing and neutralizing spilled electrolyte, for fire protection, for protecting charging apparatus from damage by trucks, and for adequate ventilation for dispersal of fumes from gassing batteries.1910.178(g)(1): Battery charging installations shall be located in areas designated for that purpose.The certification shall include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation. The employer shall certify that each operator has been trained and evaluated as required by this paragraph (l). 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance shall be conducted at least once every three years.1910.178(l)(4)(ii)(E): A condition in the workplace changes in a manner that could affect safe operation of the truck.1910.178(l)(4)(ii)(D): The operator is assigned to drive a different type of truck or.1910.178(l)(4)(ii)(C): The operator has received an evaluation that reveals that the operator is not operating the truck safely.1910.178(l)(4)(ii)(B): The operator has been involved in an accident or near-miss incident.1910.178(l)(4)(ii)(A): The operator has been observed to operate the vehicle in an unsafe manner.1910.178(l)(4)(ii): Refresher training in relevant topics shall be provided to the operator when:.1910.178(l)(2)(iii): All operator training and evaluation shall be conducted by persons who have the knowledge, training, and experience to train powered industrial truck operators and evaluate their competence.1910.178(l)(2)(ii): Training shall consist of a combination of formal instruction (e.g., lecture, discussion, interactive computer learning, video tape, written material), practical training (demonstrations performed by the trainer and practical exercises performed by the trainee), and evaluation of the operator's performance in the workplace.1910.178(l)(1)(ii): Prior to permitting an employee to operate a powered industrial truck (except for training purposes), the employer shall ensure that each operator has successfully completed the training required by this paragraph (l), except as permitted by paragraph (l)(5).1910.178(l)(1)(i): The employer shall ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l).OSHA: "It is a violation of Federal law for anyone UNDER 18 years of age to operate a forklift or for anyone OVER 18 years of age who is not properly trained and certified to do so.".Beyond that, many workers can also be injured when (1) lift trucks are inadvertently driven off loading docks (2) lifts fall between docks and an unsecured trailer (3) they are struck by a lift truck or (4) they fall while on elevated pallets and tines. ![]() For example, retail establishments often face greater challenges than other worksites in maintaining pedestrian safety. Workplace type and conditions are also factors in hazards commonly associated with powered industrial trucks. For example, a sit-down, counterbalanced high-lift rider truck is more likely than a motorized hand truck to be involved in a falling load accident because the sit-down rider truck can lift a load much higher than a hand truck. ![]() Each type presents different operating hazards. There are many types of powered industrial trucks. ![]() What are the hazards associated with operating powered industrial trucks? Over-the-road haulage trucks and earth-moving equipment that has been modified to accept forks are not considered powered industrial trucks. Powered industrial trucks can either be ridden by the operator or controlled by a walking operator. They can also be used to raise, lower, or remove large objects or a number of smaller objects on pallets or in boxes, crates, or other containers. Powered industrial trucks, commonly called forklifts or lift trucks, are used in many industries, primarily to move materials. Provides information on OSHA's Powered Industrial Truck requirements and industry best practices. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |